Bearings
type:
1.deep groove ceramic bearings, 6000
series, 6200 series, 6300 series
2.self-aligning
ceramic bearings, 1200/1300 series, 2200/2300 series
3.single direction thrust ceramic bearings, 51000
series, 52000 series
4.angular contact ceramic
bearings, 7000 series
Full
ceramic(All-ceramic) bearing of ZrO2
material
Full ceramic bearing have excellence
performance as special electrical and magnetism
resistance, wear and corrosion resistance, lubrication
and maintenance free when working, especially high and
low- temperature application. etc. could be used in
awful environment and specially condition. The rings and
balls made by full ceramic material:ZrO2, as a standard
constructor, the cage made by PTFE, generally we also
could make the cage with
GFRPA66-25,PEEK,PI,AISI,US304,SUS316,Cu,etc
Full
ceramic(All-ceramic) bearing of Si3N4
material
Full ceramic bearing made with Si3N4
have some better performance than ZrO2, the rings and
balls made by full ceramic material:Si3N4, as a standard
constructor, the cage made by PTFE, generally we also
could make the cage with GFRPA66-25, PEEK, PI, Phenolic
Textolite Tube ,etc. Compares than the material of ZrO2,
The SiN4 ceramics bearings could endure heavier load and
could be used in higher temperature environment. Also we
could offer precision ceramic bearing which generally
used in high-speed and high-rigidity spindle. the
manufactured clearance could be P4 TO UP grade.
Full ceramic (All-ceramic) bearing of full
complement balls
Full ceramic bearing of full
complement balls has an add-ball gap on its side.
Because using no frame design, the bearing able to
install more ceramic balls than the standard
construction, so the heavier load ability increased
more. In addition, to avoid the limited of the frame
material, this bearing same as the full ceramic bearing
of ceramic cage has corrosion resistance and high
temperature application. This series of bearing is not
for high –speed choice, it should be to install on the
unforced side.
Full ceramic(All-ceramic) bearing of
ceramic cage
Ceramic cage has excellence
performance as wear and corrosion resistance, high
strength, lubrication and maintenance free when working.
Adopting the ceramic cage, Ceramic bearing can be used
in the most inclemency environments as corrosive, low
temperature, high vacuum. The normal used ceramic
materials are ZrO2, Si3N4 or Sic.
Hybrid construction ceramic ball
bearing
Ceramic ball especially Si3N4 have the
following performance as low density, high strength, low
tribology modulus, wear resistance, well rigidity,
lubrication and maintenance free when working, it’s the
best choice for rollers (inner ring and outer ring are
made by metal) of the hybrid construction ceramic ball
bearing which are used in high-speed, high accuracy and
long life environments. Normally, GCr15 or AISI440C
makes inner ring and outer ring; the ceramic ball can
adopt ZrO2, Si3N4 or Sic. |
